Paese e lingua:
Website:
Refrigerators and freezers
Refrigerator/freezer +4°C / -20°C

X-Cold 300/2TN-TS

The X-COLD 2TS line by Angelantoni Life Science represents the high-quality range of laboratory refrigerator-freezers that provide an ideal environment for storing biological samples and reagents.

  • refrigerator-freezers-als-x-cold-2ts-tn-300

The 300 liter X-Cold 300/ 2TN-2TS combined model offers a 200 liter +4°C compartment and a 100 liter -20°C compartment and is available with a glass or blind door for both compartments and a key lock.

The structure is fitted with 60 mm thick, high-density injected CFC-free polyurethane foam insulation.

The electronic board is of the latest generation, with a full color display, available in 2 versions, a 3-inch and a 7-inch touch screen, complete with a system for recording parameters.

All recorded data can be transferred to a computer via USB drive, or via WiFi/Ethernet/3G network technologies available through the use of special accessory modules.

It is also possible to transfer and store the same data on an ALS dedicated server via the CLOUD service provided.

  • Glass or blind door for both compartments
  • Inside in stainless steel
  • Mechanical lock with key
  • Latest generation electronics
  • USB port for data downloading


For further information please click on 'contact us' and fill in the form

  • Mounted on wheels with brake
  • Safety thermostat to prevent freezing
  • GSM module for alarm signaling
  • WiFi, ETH and UMTS-3G modules for connection to the ALS Cloud
  • Cryolog software for local monitoring


For further information please click on 'contact us' and fill in the form

The latest generation controller guarantees high performance and reliability thanks to:

  • Simple and functional interface
  • Password-protected access with 3 levels of privileges: USER, SERVICE and ADMINISTRATOR
  • Three separate processors communicating with each other with CAN-BUS connection system
    ① Adjustment
    ② Alarm
    ③ System supervision/recording


The Alarm system ② has a dedicated PT100 probe, redundant with the one used for the Adjustment ①. Power is distributed to the two sections of ①Adjustment and ②Alarm which are physically separate (although mounted on the same support) and both have a dedicated power supply.

In case of the main power supply default, the alarm section ② continues to be powered by the back-up battery (with 36 hours autonomy) and provides power to the user panel ③ while maintaining the ability to display current data and store historical data.

The supervision unit ③ (user panel) constantly monitors and provides information on the correct operation of the alarm section ② and the control section ① and promptly notifies the user of any data storage anomalies.

Temperature

Available versions

+4°C/-20°C

300/ 2 TN 2TS

+4°C/-20°C

300/ 2 TN 2TS-GL